‘Motor/Hardware’ Pictures Wanted

[Raymond]

In support of the race action slide show we are developing (see my thread “Action Pictures Wanted”) we would also like to get our hands on motor and hardware pictures. The project is taking on the added element of ‘education’. We would like to use any focus pictures you may have of motors any related hardware such as throttles or throttle cable hookups or kick out brackets as setup for a run or steering wheel cable hubs or…anything that could support this project.

The thought is to capture and display all the different motors along with detail shots of some of the miscellaneous hardware used so as to help dispel some of the mystery of our sport.

Thanks for supporting

[OldRacerBU]

Mercury 44 setup with 4 carbs.
Alan

[OldRacerBU]

http://www.boatracingfacts.com/forums/showthread.php?t=6393

Great idea to catalogue the things that have been done over the years. Some time back I started a thread on Boat Racing Facts titled 40-H in the technical section. The link is above. There are a ton of photos that I have posted along with a great number of other folks. You might find the thread useful.
Alan

[OldRacerBU]

Old Merc 700 installed on a speedmaster

[OldRacerBU]

Mercury was intending to introduce the Mark 25-H but never did. Below is one of two know Mark 25-H lower units.
Alan

[fbref5269]

here is a 44 quincy looper i restored.

frank
52-E

[hydroid]

Ray, great idea; provide a grocery list of engines/classes you want to feature.
OldBU's pics are about the closest thing to Modified Porn; spectacular perfection(eg: P Anderson/A Jolie) for centerfold calendar pics, but a long way from my daily driver I wake up beside every morning....

[OldRacerBU]

Need to do a major cleanup.

Alan

[fcliff]

Here is a pic of a mod 302

[25xs]

I saw this engine in 2004 at Lake Buhlow (Pineville, LA). I "THINK" it was Larry McAffee's? Someone correct me via email and I'll edit this post.
TomBrockmeyer@gmail.com

The engine mounting is rotated to keep water out of the carbs as well as to allow the exhaust to exit straight out without elbows.

Note the "golfball" dimpled gearcase as well.

<a href="http://s1110.photobucket.com/albums/h442/TomBrockmeyer/Twisted%20D-mod%20engine/?action=view&amp;current=PA090246.jpg" target="_blank"><img src="http://i1110.photobucket.com/albums/h442/TomBrockmeyer/Twisted%20D-mod%20engine/PA090246.jpg" border="0" alt="Photobucket"></a>

<a href="http://s1110.photobucket.com/albums/h442/TomBrockmeyer/Twisted%20D-mod%20engine/?action=view&amp;current=PA090245.jpg" target="_blank"><img src="http://i1110.photobucket.com/albums/h442/TomBrockmeyer/Twisted%20D-mod%20engine/PA090245.jpg" border="0" alt="Photobucket"></a>

[curbman]

A Bass Machine mid section and gear case plus a Mark 78 block on top and let the fun begin.

[KG4]

A few pictures that i googled.

[KG4]

Cant forget the mighty yamato!

[KG4]

The old school high winding American Hot Rod!

[Raymond]

Great! Keep them comming - all modles- all angles - all configuratoins. Don't be afraid to post 'cowl-off' shots either.

[thetrailergod]

heres a 3 holer

[Jeff Akers]

Formula E...

[Silas_53A]

A Bass Machine mid section and gear case plus a Mark 78 block on top and let the fun begin.

That looks like one hell of a ride.

[curbman]

That looks like one hell of a ride.

It sure is did you check it out at http://www.youtube.com/watch?v=QofQvP1hM6A Just to much fun

[spud62w]

How about some Aluminum tanks and a Aluminum Cart?

[Raymond]

Yes, tanks and carts also. We are looking of images of everything

Thanks

[john527]

44 ci

[Tom Cronk]

Go to front of Hydroracer web site for pictures and prices
on hardware from Portage Bay Systems (KELLER),Brown
Tool & Machine,Lee Tietze.

Tom Cronk
BROWN & KELLER
DEALER