Wanted, 5 Liter hydro prop

[Don Brown]

I am trying to find a prop for my 5 Liter hydro. 12” X 21” or up to 24” pitch. Any help in finding a good used or repairable prop would be appreciated. See attachment:

Tubweiser

[Ron Hill]

I have a pretty FRESH 12 1/2 X 22 (I'd call it a 23) Mercury Cleaver. It started life as a Merc Lab Prop. I was cutting these for an Unlimited Light...

Not sure this is what you are looking for, but want $500 delivered... I'd throw in three reworks, if needed.

I call this cut a Cleaper... I could cut it to an actual cleaver and end up with 12 inches of diameter.....

Tell you what... If you want it, send me $400 and saned the Web master here, Dan Lawerance, a hundred....

[Ron Hill]

A little better shot...

[Ron Hill]

Sorry, this is an inch and 1/8, 19 spline. I'll be on the look out for a 15 spline....

[MOTION LINE]

This one goes for 300 € + shipment!
Semifinished never used, no splines.
RH or LH available!
Kiekhafer copy 22".

[Ron Hill]

If you buy that wheel, I do have a 15 spline broach. To get the prop to race condition, figure around $200.....

Figure, educated guess, $80 freight to get it here from Finland.

Motionline:

Do you mind posting a close up of some of those smaller left hands... Maybe, post the size...Some of them suckers look like I could use them...

[Don Brown]

Just received a lead on a 12X21 with a 1" 15 spline bought new from merc a while ago. The fella is going to get back to me next week sometime. I'll keep that motion line prop as a backup plan if this one doesn't turn out.

Thanks Don

[Ron Hill]

What I was calling a 5 Liter was a Six liter. 1 1/8 with 19 splines...

You've got a prop and that is what is important..

[MOTION LINE]

Ron

Here is one that I made 10 years ago
material 17/4;

Pitch 12,4" for König gearcase!

I have about 50 hydro props, everyone is for sale!

[Ron Hill]

ronhill@speakeasy.net

17-7?? What is that? I use 17-4 and 15-5...Never heard of 17-7...